Pavestone Porcelain Tile Protector (1L)
Water based pre-grout treatment for use on all types of textured porcelain tile surfaces. Helps with grout and jointing compound release. A pre-grouting treatment for use during porcelain paving installation which protects the porcelain paving tile against difficult to remove when dried on surface grout residue.
Pavestone Porcelain Tile Protector protects the porcelain tile without altering the paving tile characteristics.
A further coat can be applied after grouting, which will help with the removal of everyday stains from organic matter.
Also available in 5 ltr.
Material Type | Liquid |
Pack content | 1 ltr |
KEY FEATURES:
- Interior & exterior use
- Water based pre-grout treatment
- For use on all types of textured porcelain tile surfaces
- Helps with grout and jointing compound release
- On exterior surfaces a further coat can be applied after grouting, which will help with the removal of everyday stains from organic matter
COVERAGE:
1 ltr | 5 ltr | |
Low Porosity Surfaces | 30m2 | 150m2 |
Preparation
Ensure surface to be treated is completely clean, dry and free from dirt, grime, cement and grout. If necessary, first wash surfaces with a dilute solution of Pavestone Patio Cleaner 1:5 Rinse well to remove residues and leave to dry
Application
Before grouting apply evenly to the surface using a broad paint brush, foam roller or light pressure sprayer. Allow to dry for 30 minutes. Apply a second coat. Leave to cure for a minimum of 1 hour before grouting or pointing. Once pointing is dry and all residues have been removed a further coat of protector can be applied covering the joints as well.
Hard to remove dried on cement stains can be removed using Pavestone Cement &Grout Residue Remover. Hard to remove stains from jointing compounds can be removed using Pavestone Resin Residue Remover.